Toshiba DP120F Service Manual page 270

3.2.2 RX Drive Area
The RX drive area consists of the Feed gear assembly, Main motor assembly, Paper pickup
roller, Paper pickup solenoid, Paper feed roller, Paper feed sensor and Paper exit sensor. It
conveys the power of the Main motor assembly to each area of the reception section and
functions to feed recording paper.
• Feed gear assembly
The Feed gear assembly consists of the components as shown in the figure below and is
driven by the Main motor assembly.
Fuser roller gear
Exit drive gear
Exit idle gear
Fuser idle gear
• Main motor assembly
The Main motor assembly is the only drive source in the reception section. When reading
of the receive data from the remote station or copy data of one document page is com-
plete, the Main motor rotates in the arrow direction in the figure above.
• Paper pickup roller
The Paper pickup roller supplies the recording paper from the Recording paper tray. The
roller is driven by the Main motor assembly, but the timing of its rotation is controlled by the
Paper pickup solenoid.
DP120F/DP125F Mechanical Description
Idle gear
Drum drive gear
Fig. 5-3-3
5-10
Main motor gear
Pickup roller gear
Idle gear
05-03-03
March 2000 © TOSHIBA TEC