Connecting To The Power And Telephone Lines - Toshiba DP120F Service Manual

6. Connecting to the Power and Telephone Lines

CAUTION:
Procedure:
(1) Ensure that the Power switch is OFF.
(2) Plug the Power cord into the wall outlet. Be sure the outlet is rated for 115VAC/60Hz or
220VAC/50Hz/60Hz, and that it is properly grounded, before plugging the machine in.
(3) Connect the phone line cord to the LINE jack on the unit.
(4) Connect the other end of the phone line cord to the modular jack on the wall.
(5) Connect the phone line cord of the external telephone set (if present) to the TEL jack on
the unit.
Phone line cord
DP120F/DP125F Installation
• Do not use any other than AC rated voltage (115VAC/60Hz, 220VAC/
50Hz/60Hz).
• Do not share an outlet with other electric appliances.
• Do not share a wall outlet with any machine that causes a large,
instantaneous load (air-conditioner, copier, etc.).
• Do not place the Power cord where it will be walked on, or crushed.
• When plugging or unplugging the unit, hold the plug but not the
cord.
• Be certain to connect the machine to a properly grounded wall
outlet.
Fig. 3-6-1
3-34
External telephone
3-6-01
March 2000 © TOSHIBA TEC