Toshiba DP120F Service Manual page 96

1.3.4 Recovery Transmission
This sets the Recovery Transmission ON or OFF. When set to ON, a transmission that has
failed, and the specified redial attempts have been made, will be stored in memory. The stored
transmit job can be resent before the time period set below has expired. When set to OFF, such
transmissions will automatically be cleared from memory. When the ON status selected, the
time period to store such documents in memory is also set.
Use the [ ↑ ] or [ ↓ ] keys to select the desired option (ON or OFF), then press the
(1)
[ENTER] key.
RECOVERY TRANSMIT
1.ON
2.OFF
ON
When set to ON, documents are stored after a failed redial attempt for the time period
designated below. After that time has expired, the stored documents are cleared from
memory.
OFF
When set to OFF, documents are cleared from memory immediately upon completion of
the last redial attempt.
(2) The screen below is displayed. Enter the desired time length for storing the document
data (01 to 24, in units of hours), then press the [ENTER] key.
RECOVERY TRANSMIT
STORED TIME-=(01-24)
STORE TIME
A value 01 to 24 (hours) can be entered.
(3) After the "OPERATION COMPLETED" message is displayed, press the [STOP] key to
return to the Standby Mode screen.
DP120F/DP125F Function Settings
[MENU], [4], [2], [04]
06
4-30 March 2000 © TOSHIBA TEC