Toshiba DP120F Service Manual page 90

1.2.18 Auto Receive Mode
Use this setting to decide whether the machine is to be used primarily as a dedicated facsimile
unit or as both a fax and a telephone.
Use the [ ↑ ] or [ ↓ ] keys to select the desired mode (AUTO RECEIVE or MANUAL
(1)
RECEIVE), and press the [ENTER] key.
AUTO RECEIVE MODE
1.AUTO RECEIVE
2.MANUAL RECEIVE
Auto Receive Mode
This mode is selected to use this machine only as a facsimile unit. When it is selected, the
Ring Delay count is to be set in the range from 01 to 10, followed by the [ENTER] key.
AUTO RECEIVE
RING DELAY = (01-10)
Manual Receive Mode
This mode is selected to connect the machine to a line which is used as a voice tele-
phone. In this case, the machine is used for both voice communication and fax sending/
receiving, the [START] key must be pressed after lifting up the handset (option).
(2) When the "OPERATION COMPLETED" message is displayed, press the [STOP] key to
return to the Standby Mode screen.
DP120F/DP125F Function Settings
[MENU], [4], [1], [15]
02
4-24 March 2000 © TOSHIBA TEC