Toshiba DP120F Service Manual page 5

Relay transmission request function:
The DP120F/DP125F can originate a relay transmission or serve as a relay station in relay
transmission transactions.
Secure RX:
Secure RX allows reception to memory to secure documents during unattended periods. The
user can select a specific time period and all day (24-hour) operation on selected days. The
feature can be activated and deactivated by using a 4-digit security code.
Memory transmission:
Allows you to dial the remote party while scanning the document in memory. The document
page data is cleared as the sending of each page is completed. Therefore, the memory is
utilized effectively for transmissions. A maximum of 100 jobs of memory transmission are
possible.
Public fax box:
A document can be reserved in image memory to be polled by remote stations multiple times.
One of its merits is that any remote station (even one with a non-TOSHIBA facsimile) can poll
such documents without a password.
Program continuous polling:
By designating the starting interval, time, and day-of-week, an endless polling can be set. Once
set, polling receptions are repeated at the same time on the designated day-of-week.
Sub-address communication:
The DP120F/DP125F supports communication applications using sub-address (SUB/SEP/PWD)
commands conforming to ITU-T. Sub-address communication is possible by keypad dialing,
one-touch key dialing, and abbreviated dialing using the sub-address settings in Comm. Op-
tions.
Security communication:
For transmissions, the facsimile checks if the telephone number of the remote party's facsimile
CSI matches the number dialed on the unit itself. If it matches, the transmission will start. For
receptions, the facsimile checks if the telephone number of the remote party's TSI matches any
number assigned to an abbreviated dial number or one touch key. If it matches, the reception
will start. Thus transmissions or receptions with any authorized party will be prevented at the
earliest stage.
Substitute reception into memory:
When there is no paper remaining in the recording paper tray(s) of the facsimile, when a record-
ing paper jam occurs, the toner is empty, or printing is already in progress, the received data is
stored into memory instead of being output to recording paper. When the trouble is corrected, or
the active printing job is completed, the received data in memory will then be printed.
March 2000 © TOSHIBA TEC 1-3 DP120F/DP125F Introduction