Service Modes; Service Modes (For Copier) - Toshiba E-STUDIO190F Service Manual

5 Service Modes

5.1.

Service Modes (For Copier)

These Service Modes are provided to assist the technician in checking for abnormalities in the copier and a
means of making adjustments to the Input/Output of major components.
5.1.1. Service Mode Procedure
1. To select the Service Mode
The service mode is selected when "FUNCTION", "ORIGINAL SIZE" and "3" keys are sequentially
pressed, then F1 will appear in the display.
2. To exit the Service Mode
The service mode is reset when the "FUNCTION" and "CLEAR" keys are pressed sequentially.
5.1.2. Copier Service Mode Functions
Service
Mode
F1 Self Test
F2 Single Copy Test
F3 Continuous Copy Test
F4 Input / Output Status Test
F5 Function Parameters
F6 Adjust Parameters
F7 Electronic Counter
F8 Service Adjustment
F9 Unit Maintenance
Service Modes (For Copier)
Item
00 Scanner LED Test
01 LCD/LED Test
02 Page Memory Test
03 Print Test Pattern 1
04 Print Test Pattern 2
05 Print Test Pattern 3
06 Print Test Pattern 4
This test is used for checking the
Scanner LED.
This test is used for checking the LCD
and LEDs.
This test is used for checking the Page
Memory.
Prints the pattern for setting the Paper
position alignment.
Prints the Slant pattern for setting the
Paper position alignment.
Prints the Grid pattern for setting the
Paper position alignment.
Prints the pattern for setting the Duplex
Paper position alignment.
One sheet is copied when the Start key
is pressed.
Multi copies are made when the Start
key is pressed.
The functioning of Input / Output items
(selected item numbers) is checked.
Various function settings (selected by
code numbers) can be changed.
Various function settings (selected by
code numbers) can be adjusted.
Electronic Counters for Maintenance
Perform pseudo-operation of an item
(selected by code numbers)
Fax Service Mode
Service Alert Tel #
Firmware Version
Print Device Info.
138
Function