Toshiba E-STUDIO190F Service Manual page 127

Code Mode
718 XMT
719 RCV
720 POP
721 POP
722 RCV
725 XMT
POP
726 XMT
POP
727 XMT
728 XMT
729 XMT
730 RCV
731 RCV
741 XMT, Polling PSTN Unable to dial
800 Relay
Comm.
814 Conf. XMT
Conf. Polling
Relay
Comm.
815 Conf. RCV
Fax Information Codes
Phase Description of Problem
LAN Page Memory Overflow occurred
while receiving printing data. The
paper size selected within your
application to print is larger than
the paper size loaded in the
Tray(s).
LAN Received data via LAN is in a
format that is not supported.
LAN Unable to connect with the POP
Server.
LAN Unable to login to the POP Server. Incorrect User Name or Password is
LAN Failed to obtain the Network
Parameters (such as: IP Address,
Subnet Mask, Default Gateway IP
Address, etc.) from the DHCP
server.
LAN DNS Server connection timed out. Incorrect DNS Server Address is set.
LAN Received an error response from
the DNS Server.
LAN Received an Error or No
Response from the Remote
Internet Fax. (SMTP Direct XMT)
LAN
LAN Failed to authenticate (SMTP
AUTHENTICATION) when
connecting with the SMTP server.
LAN Unable to program the Internet
parameters or the autodialer via
Email from a PC.
LAN Dialer full while Relayed
Transmission Request was
received.
PSTN The machine was requested to
relay a document but has no Relay
Hub capability.
PSTN The remote station does not have
Relay XMT nor Confidential
Communication capability.
PSTN Mailbox full.
Check the document size and
resolution.
Ask originator to re-send in a supported
size and resolution.
Ask the originator to re-send with a
supported file attachment:
* In a TIFF-F format.
* Image data conforming to A4/Letter
size.
Incorrect POP Server Address is set.
POP Server is down.
set.
LAN Cable is disconnected.
DHCP is not available.
(Contact the Network Administrator.)
DNS Server is down.
Incorrect POP Server Address is set.
Incorrect SMTP Server Address is set.
Remote Internet Fax Errors: Busy or
Job Number Overflow for Relay XMT.
(Retry is possible)
Remote Internet Fax Errors: Memory
Overflow or No Power.
(Retry is not possible)
SMTP AUTHENTICATION, User Name
and/or Password are incorrect.
(Contact the Network Administrator.)
Verify that the Fax Parameter #158 is
set to Valid.
Dial buffer for manual number dialing
(70 stations) is being used.
Deleted the registered station name
before dialing with Timer Controlled
Communications, etc.
127
Cause