Toshiba E-STUDIO190F Service Manual page 151

No.
31 Not Used
32 FLS / LG Count
99 All Counter Clear
5.1.7. F8 Mode: Service Adjustment
Set the machine to Service Mode and press "8" key on the Keypad.
↓
Press the "START" key.
↓
Enter the desired code number or press "V", "/\" arrow keys.
↓
If you wish to select another code number, scroll the menu with the arrow keys.
↓
Press the "SET" key.
↓
Enter the desired function code number and press "SET" key.
↓
When the "CLEAR" key is pressed, the selected code input will not be accepted.
↓
Press "STOP" key, then press "FUNCTION" and "CLEAR" keys sequentially to exit the service mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
No.
00-05 Not Used
06 Error Log View
07 Error Log Clear
08-17 Not Used
18 C18 PRT PWM ADJ.PTN.
(LSU PWM Pattern)
19-46 Not Used
47 C47 ADF Scan Test
48-54 Not Used
F7 Mode
Item
F8 Mode
Item
Total count of FLS / Legal Print.
All counters are cleared.
a) Each time the arrow key is pressed, the machine
errors or paper jam codes stored in memory are
displayed, beginning with the oldest code.
Note:
Only the 30 most recent codes are displayed.
a) Press the Reset key.
A Message "Error code can be cleared with the
Start key" is displayed on the LCD.*
b) Press the Start key.
Print out the Test Pattern.
Proceed when the LSU is replaced.
Place the document on the ADF first.
Press START key to begin.
151
Remarks
Remarks