Installing the coin-cell battery
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the coin-cell battery and provides a visual representation of the installation
procedure.
Steps
1. Adhere the coin-cell battery to the slot on the palm-rest assembly.
2. Route the coin-cell battery cable through the routing guides on the palm-rest assembly.
3. Connect the coin-cell battery cable to the connector on the system board.
Next steps
1. Install the fan.
2. Install the
M.2 2280 SSD card
3. Install the
WWAN card
4. Install the
WLAN
card.
5. Install the
3-cell battery
6. Install the
base
cover.
7. Install the
SIM
card.
8. Install the
microSD
card.
9. Follow the procedure in
or
M.2 2230 SSD
(optional).
or
4-cell
battery.
after working inside your
card.
computer.
Removing and installing components
63