Steps
1. Align the screw holes on the heat sink with the screw holes on the system board.
2. In sequential order (as indicated on the heat sink), tighten the four captive screws that secure the heat sink to the system
board.
Next steps
1. Install the
3-cell battery
2. Install the
base
cover.
3. Follow the procedure in
System board
Removing the system board
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
SIM
card.
4. Remove the
base
cover.
5. Remove the
3-cell battery
6. Remove the
WLAN
card.
7. Remove the
WWAN card
8. Remove the
M.2 2280 SSD
9. Remove the fan.
10. Remove the
heat
sink.
50
Removing and installing components
or
4-cell
battery.
after working inside your
before working inside your
card.
or
4-cell
battery.
(optional).
or
M.2 2230
SSD.
computer.
computer.