Camera; Removing The Camera - Dell P138G Service Manual

Steps
Adhere the tape to secure the eDP cable to the display back cover.
Next steps
1. Install the display panel.
2. Install the display hinges.
3. Install the display bezel.
4. Install the display assembly.
5. Install the 3-cell battery
6. Install the base cover.
7. Follow the procedure in

Camera

Removing the camera

Prerequisites
NOTE: The camera removal procedure is applicable only for Latitude 5330 laptop and not for the 2-in-1 configuration.
1. Follow the procedure in
2. Remove the base cover.
3. Remove the 3-cell battery
4. Remove the display assembly.
5. Remove the display bezel.
6. Remove the display hinges.
7. Remove the display panel.
About this task
The following images indicate the location of the camera and provide a visual representation of the removal procedure.
Steps
1. Peel the conductive tape that secures the camera cable in place.
2. Lift the latch and disconnect the camera cable from the connector on the camera module.
or 4-cell battery.
after working inside your
before working inside your
or 4-cell battery.
computer.
computer.
Removing and installing components 99