Installing PV Input Power Cables
6.4
1. Use a wrench to remove the waterproof gland from the PV input terminal on the power module.
2. Install the PV input power cables.
Installing Battery Module Power Cables
6.5
1. Use a wrench to remove the
waterproof glands from the
cascading terminals of the
battery modules.
2. Install power cables for the
battery modules.
3. Use a wrench to remove the
waterproof gland from the
power module.
4. Install power cables between
the battery module and power
module.
Take the disassembly wrench out
of the decorative cover.
Take the disassembly wrench out of
•
the decorative cover.
Prepare cable terminals by referring to
•
the appendix.
Standard Scenario
17