Table of Contents
Advertisement
• The installation and usage environment must meet relevant international, national,
and local standards for lithium batteries, and are in accordance with the local laws
and regulations. The user is obliged to protect the battery against fire or other
hazards.
• Ensure that the battery is not accessible to children and away from daily working or
living areas, including but not limited to the following areas: studio, bedroom,
lounge, living room, music room, kitchen, study, game room, home theater,
sunroom, toilet, bathroom, laundry, and attic.
• When installing the battery in a garage, keep it away from the drive way. It is
recommended that the battery be mounted on the wall higher than the bumper to
prevent collision.
• Do not install the battery in places that are enclosed, unventilated, or difficult for
firefighters to access. Do not place flammable or explosive materials around the
battery. It is recommended that the battery be mounted on a wall to avoid contact
with water.
• Install the battery in a dry and well-ventilated environment. Secure the battery on a
solid and flat surface.
• Install the battery in a sheltered place or install an awning over it to avoid direct
sunlight or rain.
• Install the battery in a clean environment that is free from sources of strong
infrared radiation, organic solvents, and corrosive gases.
• For areas prone to natural disasters such as floods, debris flows, earthquakes, and
typhoons/hurricanes, take corresponding precautions for installation.
• Keep the battery away from fire sources. Do not place any flammable or explosive
materials around the battery.
• Keep the battery away from water sources such as taps, sewer pipes, and sprinklers
to prevent water seepage.
• Do not install the battery in a position where it is easy to touch as the temperature
of the chassis and heat sink is high when the battery is running.
• To prevent fire due to high temperature, ensure that the vents and the cooling
system are not blocked when the battery is running.
• Do not expose the battery to flammable or explosive gas or smoke. Do not perform
any operation on the battery in such environments.
• Do not install the battery on a moving object, such as ship, train, or car.
• Do not install the battery outdoors in salt-affected areas because it may corrode. A
salt-affected area refers to the region within 500 meters from the coast or prone to
sea breeze. The regions prone to sea breeze vary with weather conditions (such as
typhoons and monsoons) or terrains (such as dams and hills).
• In backup power scenarios, do not use the battery for the following situations.
a. medical devices substantially important to human life.
b. control equipment such as trains and elevators, which may cause personal injury.
c. computer systems of social and public importance.
d. locations near medical devices.
e. other devices similar to those described above.
Wall and Ground Requirements
3.2
•
The product can be mounted on a concrete wall or brick wall and cannot be mounted on a
sandwich panel wall or a wooden wall.
•
The bearing capacity of the ground must be greater than or equal to 500 kg/m
6
2
.
Advertisement
Table of Contents
