L P CONVERSION
LG Electronics Training Center, LGEAI, U.S.A.
Installation Check
1. Remove all items from the drum
2. Press and Hold the TEMP. CONTROL and SIGNAL buttons
3. Press the POWER button
4. Release all buttons. "InS" will be displayed.
5. Press the START/PAUSE button
•
The dryer will run a 2 minute cycle monitoring the Flow Sense
feature and electrical connections
NOTE: The dryer should be cool before starting this test. If the dryer was warmed up
during installation, run the AIR DRY cycle for a few minutes to reduce the interior
temperature.
LG Electronics Training Center, LGEAI, U.S.A.
21
22
DLE4870W Dryer
DLE4870W Dryer