LG TurboWash WM3070H A Series Manual page 64

Error Codes – LE
NOTE: Always check the Stator before replacing a Main Board, as a shorted
Stator will damage the Main Board.
LG Electronics Training Center, LGEAI, U.S.A.
Error Codes – EE
NOTE: The EE Error is only displayed when the START/PAUSE button is first
pressed in the QC Test Mode.
LG Electronics Training Center, LGEAI, U.S.A.
• The LE Error Code indicates a "Locked Motor Error"
• Condition: The Hall Sensor is not reporting motor
rotation.
• Possible Causes:
 Bad Hall Sensor, or associated wiring
 Bad connection to the Stator or Main Board
 Foreign material preventing Tub and/or Rotor
movement
 Bad Motor
 Bad Bearings
 Cracked Magnets on Rotor
 Bad Main Board
126
• The EE Error Code indicates an "EEPROM Error"
• Condition: Lack of communication from the EEPROM.
• Possible Causes:
 Bad Main Board
127