Advertisement
Installation Instructions
Inlet Valve / Cold & Hot Valve Connectors
LG Electronics Training Center, LGEAI, U.S.A.
Installation Instructions
Elbow bracket usage for stand pipe & laundry sink
Stand Pipe Installation
LG Electronics Training Center, LGEAI, U.S.A.
Washer Fill Hose
Periodically inspect fill
hoses for cracks, leaks, &
wear.
Replace fill hoses every 5
years.
Do not stretch or crush fill
hoses during installation or
service.
Recommended water
pressure is 14.5 psi to 116
psi (100 to 800 kPa). If
water pressure exceeds
116 psi, a pressure
reducing valve should be
installed.
Recommended supply hot
water temperature 120 –
135°F and cold supply of
60°F.
42
Drain Hose Installation
Connect elbow bracket
within 4" of hose end.
Stand Pipe Installation:
Insert Drain Hose into
Stand Pipe and secure
hose to stand pipe.
Laundry Sink Installation:
Hang & Secure hose at
top of sink and secure
hose to sink leg.
Laundry Sink Installation
43
WM3070H*A Washer
WM3070H*A Washer
Advertisement
