Toro 30609 Operator's Manual page 42

Figure 46
•
If the regeneration process is not
allowed by the engine computer, the
"DPF Regen Not Allowed" message
displays in the InfoCenter
Press the left button to exit to the home
screen
Important:
requirements for regeneration or if
less than 50 hours have passed since
the last regeneration, the "DPF Regen
Not Allowed" message appears.
Figure 47
8. While the regeneration is running, the InfoCenter
returns to the home screen and shows the
following icons:
(Figure 47).
If you did not meet all the
9. The parked regeneration is complete when the
"Regen Complete" message displays in the
InfoCenter. Press the left button to exit to the
home screen
g213424
Recovery Regeneration
•
If you ignore the request for a parked regeneration
(displayed in the InfoCenter) and continue to
operate the machine, a critical amount of soot
builds up in the DPF.
•
If a recovery regeneration is needed, the
InfoCenter displays engine warning SPN 3719,
FMI 16 (Figure
derates engine power to 85%.
g212410
Important:
regeneration within 15 minutes, the engine
computer derates engine power to 50%.
42
The engine is cold—wait.
The engine is warm—wait.
The engine hot—regeneration in progress
(percent complete).
(Figure 48).
Figure 48
49) and the engine computer
Figure 49
If you do not complete a recovery
g212404
g213867