Table of Contents
Advertisement
1. Setting Up Wireless Network
Selecting 802.1x security mode with PEAP protocol
Using the 802.1x authentication with the PEAP protocol, you must install the CA certifi-
cation file in the equipment. This equipment uses the user name and password to
authenticate the access rights to the wireless network, and the RADIUS server authen-
ticate this equipment using the CA certification file.
NOTE:
When using the 802.1x authentication with the PEAP protocol, you must install the CA
certification file in the equipment using TopAccess first. For instructions on how to
install the CA certification using TopAccess, please see TopAccess Guide.
1.
2.
3.
NOTE:
In the EAP USER NAME, enter the user name in "User Name@FQDN" format.
Example: wlanuser@toshiba.com
24
Press the [802.1x] button and press the [NEXT] button.
•
The 802.1X AUTHENTICATION SETTINGS screen is displayed.
Press the [PEAP] button and press the [NEXT] button.
•
The WIRELESS AUTHENTICATION (EAP-TLS) screen is displayed.
Enter the following items and press the [NEXT] button.
[EAP USER NAME]
Press this to enter the EAP user name that is used for the authentication.
GN-1040 Operator's Manual — Setting Up the Infrastructure Mode
Advertisement
Table of Contents
