Toshiba GN-1040 Operator's Manual page 28

1. Setting Up Wireless Network
2.
SUPPLEMENT: When pressing the [PSK PASS PHRASE] button, the letter entry screen is displayed.
Enter the value using the keyboard and digital keys, and press the [ENTER] button to
set the entry.
3.
28
Enter the following items and press the [NEXT] button.
WIRELESS ENCRYPTION TYPE
Select the encryption type for the PSK.
[TKIP] — Select this to use TKIP encryption. The TKIP provides a different key
for per packet with a message integrity check. This key will be changed for
every fixed interval.
[AES(CCMP)] — Select this to use AES encryption. The AES is the next-
generation cryptography algorithm that the U.S. government improves to replace
the DES and 3DES.
[PSK PASS PHRASE]
Press this to enter the PSK Pass Phrase. The PSK is created by using the this
pass phrase. You must enter the same pass phrase that is set in the Access
Point. The PSK Pass Phrase must be between 8 to 63 characters long.
Specify the following items and press the [NEXT] button.
TRANSMIT POWER
Select the low transmit power if you want to limit the area that the wireless
communication is enabled. If you do not have to limit the area, select [100%].
TRANSMIT RATE
Select the transmit data capacity for wireless communication. If you do not have
to specify the fixed rate, select [AUTO]. When [AUTO] is selected, this
equipment will use appropriate rate depending on the condition.
Generally select [AUTO]. The communication may fail unexpectedly if you
select a static transmit rate.
GN-1040 Operator's Manual — Setting Up the Infrastructure Mode