Select Security Mode - Toshiba GN-1040 Operator's Manual

1. Setting Up Wireless Network

Select Security Mode

After specifying the SSID, you must select the security mode for your wireless network.
The procedure to configure the security mode varies depending on the security mode
that you select.
NOTES: •
•
Selecting WEP security mode
The WEP is a data encryption method using the WEP key between the Access Point
and other wireless devices.
1.
2.
38
P.29 "Selecting WEP security mode"
P.31 "Selecting no security mode"
If the Ad Hoc Mode, only WEP or NONE can be selected for the security mode.
If you are not sure what security mode to select, see the following section to deter-
mine the security mode.
P.11 "3. Determine the Security Mode"
Press the [WEP] button and press the [NEXT] button.
• The WIRELESS ENCRYPTION - WEP screen is displayed.
Enter the following items and press the [NEXT] button.
WEP ENCRYPTION
Select the bit length of the WEP key.
KEY ENTRY METHOD
Select the character code for the WEP key.
GN-1040 Operator's Manual — Setting up the Ad Hoc Mode