Table of Contents
Advertisement
1. Setting Up Wireless Network
2.
SUPPLEMENT:
When pressing the [WEP KEY button, the letter entry screen is displayed. Enter the
value using the keyboard and digital keys, and press the [ENTER] button to set the
entry.
3.
30
Enter the following items and press the [NEXT] button.
WEP ENCRYPTION
Select the bit length of the WEP key.
KEY ENTRY METHOD
Select the character code for the WEP key.
[WEP KEY]
Press this to enter the WEP key.
The maximum length of WEP key varies depending on the WEP Encryption and
Key Entry Method.
64bit
HEX :
10
ASCII :
5
Specify the following items and press the [NEXT] button.
TRANSMIT POWER
Select the low transmit power if you want to limit the area that the wireless
communication is enabled. If you do not have to limit the area, select [100%].
TRANSMIT RATE
Select the transmit data capacity for wireless communication. If you do not have
to specify the fixed rate, select [AUTO]. When [AUTO] is selected, this
equipment will use appropriate rate depending on the condition.
Generally select [AUTO]. The communication may fail unexpectedly if you
select a static transmit rate.
GN-1040 Operator's Manual — Setting Up the Infrastructure Mode
128bit
152bit
26
32
13
16
Advertisement
Table of Contents
