Toshiba GN-1040 Operator's Manual page 31

4.
SUPPLEMENT: If you want to change the settings, press the [PREV] button to move back to the screen
that you want to change and then repeat the operation.
5.
Selecting no security mode
You can also set no security for wireless access.
NOTE: If you do not set no security, anyone how knows the SSID can connect to the wireless
network. Therefore, it is recommended to set the security if it is possible.
1.
GN-1040 Operator's Manual — Setting Up the Infrastructure Mode
Confirm the settings and press the [FINISH] button.
• The shut down screen is displayed.
Press the [YES] button to shut down the equipment.
• The wireless settings apply after restarting the equipment.
Press the [NONE] button and press the [NEXT] button.
• The TRANSMIT POWER and RATE SETTING screen is displayed.
1. Setting Up Wireless Network
31