Toshiba GN-1040 Operator's Manual page 29

4.
SUPPLEMENT: If you want to change the settings, press the [PREV] button to move back to the screen
that you want to change and then repeat the operation.
5.
Selecting WEP security mode
The WEP is a data encryption method using the WEP key between the Access Point
and other wireless devices. Compared with 802.1x and WPAPSK, the WEP is less
security. If the wireless network is configured in the Infrastructure Mode and the Access
Point supports 802.1x or WPAPSK, it is recommended to use 802.1x or WPAPSK
rather than WEP.
1.
GN-1040 Operator's Manual — Setting Up the Infrastructure Mode
Confirm the settings and press the [FINISH] button.
• The shut down screen is displayed.
Press the [YES] button to shut down the equipment.
• The wireless settings apply after restarting the equipment.
Press the [WEP] button and press the [NEXT] button.
• The WIRELESS ENCRYPTION - WEP screen is displayed.
1. Setting Up Wireless Network
29