Sharp Actius PC-MV10 Operation Manual page 103

Entering and Exiting the Setup Utility
1. Turn on the computer.
2. When the message Press <F2> to enter SETUP appears, press F2.
3. Change to the desired settings.
← or → key : Selects the menu
↓ or ↑
Minus or Space key : Changes the value.
In the item with
the sub menu and return to the previous menu.
4. Select Exit.
5. Select one of the exit methods, and press Enter.
6. Confirm the message and press Enter again. The system restarts.
When the Setup Utility is opened, power management does not work. Do
not close the display cover.
6
6-2
key : Selects the item
mark, press Enter to open sub menu. Press Esc to close