Table of Contents
Advertisement
3.
Right-click Local Area Connection.
4.
From the pull-down menu, click Properties.
5.
In the Local Area Connection Properties dialog box, set the network setting
according to the instruction of your network administrator.
Attach the provided core to your LAN cable to insure compliance with
requirements of EMC regulations for computing equipment. If your
computer is provided with a LAN cable, always use that LAN cable. If
your LAN cable has no core attached, please attach the provided core
before use.
If you cannot access the network,
1.
Click start - Control Panel.
2.
Click Performance and Maintenance; then, System. If Classic view is
selected, double-click System icon.
3.
Click Hardware tab; then, Device Manager.
4.
Double-click Network adapters, then, Realtek RTL8139 xxxxx.
5
5.
Click Advanced tab, and select Link Speed/Duplex Mode in Property: and
select an appropriate value in Value:.
6.
Click OK and close Device Manager window.
7.
Click OK and close Control Panel window.
5-8
Advertisement
Table of Contents
