Table of Contents
Advertisement
15. If you see the message asking you to insert the Product Recovery CD-ROM
disk 3, remove the disk 2 and insert the disk 3; then, press Enter.
16. If you see the message The Operating System has been recovered
successfully, remove the Product Recovery CD-ROM disk 3. The system will
restart automatically.
17. When the message Press <F2> to enter SETUP appears, press F2. The
Setup Utility opens.
18. In the Exit menu, select Load Setup Defaults; then, press Enter twice.
19. In the Exit menu, confirm Exit Saving Changes is highlighted and press
Enter twice. The system restarts.
20. Set up Windows, following the instructions on the screen. When you finish
the setup, the recovery is completed.
A-15
Advertisement
Table of Contents
