Trouble When Starting - Sharp Actius PC-MV10 Operation Manual

Trouble when Starting

Question: Why doesn't the power indicator or the battery indicator turn
on?
•
Make sure the AC adapter is correctly connected to the AC adapter jack of your
computer.
•
Make sure the AC power cable is correctly connected to a live wall outlet. Connect
another electric equipment to the wall outlet and check whether it is live or not.
•
Make sure the battery pack is correctly installed and charged.
•
If the battery pack is discharged, connect the AC adapter.
•
If all the steps above failed, follow the instructions on Why doesn't the keyboard or
the glide pad function?
Question: Why do I get the message Invalid system disk?
•
You may have inserted a non-bootable disk in the optional external floppy disk
drive unit (either a defective disk or one without an installed operating system).
Remove the disk.
Question: Why can't I boot from the floppy disk?
•
Make sure that the optional external floppy disk drive unit is correctly connected to
the computer.
•
Check whether the floppy disk set to the optional external floppy disk drive unit
contains a system disk.
•
Check in Boot menu of the Setup Utility, whether Floppy Disk Drive is set to the
first in Boot Sequence and USB FDD is set to Auto or Enabled.
Question: Why do I get the message Press<F1> to resume, <F2> to setup?
•
The setting of the Setup Utility is deleted. Run the Setup Utility and get default
value of the Setup Utility. Be sure to set the date and time correctly.
•
If you often see the message, the backup battery has no capacity left. Replace the
backup battery referring to the steps in Replacing Backup Battery of Appendixes.
T-2