6.
Tighten the screws.
7.
Insert the battery pack.
8.
Turn over the computer and connect the AC adapter.
9.
Turn on the computer.
10. If you see the message Press <F2> to enter Setup, press F2.
11. In the Exit menu, select Load Setup Defaults; then, press Enter.
12. When the message Load default configuration now? appears, select Yes; then,
press Enter.
13. In the Exit menu, select Exit Saving Changes; then, press Enter.
14. When the message Load default configuration now? appears, select Yes; then,
press Enter.
15. Click start- Control Panel.
16. Click Date, Time, Language, and Regional Options in Category view; then,
click Change the date and time.
17. Set date and time; then, click OK.
A-8