LAN unit
You can connect to a LAN (Local Area Network) with the 100 Base-TX/10 Base-T
LAN unit on your computer. To activate the LAN unit, perform the following
steps.
Use a category 3 or a category 5 LAN cable when connecting to 10
BASE-T LAN, and the category 5 only when connecting to 100 BASE-TX
LAN.
Connect your computer to LAN
1.
Turn off the computer.
2.
If your computer is provided with the LAN cable, go to the step 4. If with the
core for a LAN cable, go to the next step.
3.
Attach the provided core to one end of your LAN cable. Insert the cable into
the core and close the core until it clicks.
5
4.
Open the cover of the LAN jack on the left side of your computer.
LAN Jack
Modem Jack
To avoid damaging the LAN unit, close the LAN jack cover after you
finish using the LAN unit.
5-6