Share Mode; Internet Access; Internet Via Cellular Network Connection; Internet Via Ethernet Connection - ABB 2 Series Operation And Installation Manual

Description

3.12.3 Share mode

1
0 - 50%
50 - 100%
51 - 99%
50%

3.13 Internet access

ABB requires an internet connection to the charger for remote service operations including diagnosis,
troubleshooting and performing software/firmware update.
It is the installer's responsibility to ensure reliable internet connection to the charger. Contingency planning
and the associated costs are the responsibility of the installer.
There are two options for the internet connection:

• Internet via cellular network connection

• Internet via ethernet connection

3.13.1 Internet via cellular network connection
Connection to the charger using the charger's standard featured hardware with ABB's Charger Connect service
offering, is the preferred method. This solution provides internet access via 4G LTE wireless network. It is
expected that a cellular availability test is performed prior to construction to ensure there is reasonable signal
quality to at least one of the above-mentioned operators 4G LTE bands 2 (1900 MHz), 4 (1700/2100MHz), or 12
(700 MHz).
NOTE
The Charger supports SIM cards provided by ABB only. Any other types of SIM cards are not
supported.
3.13.2 Internet via ethernet connection
If the cellular connection is not available, ethernet connection must be made to the charger.
NOTE
Once the charger is connected to the fixed Local Area Network (LAN), some settings must be
performed by ABB service. Contact ABB for more details.
2
One EV connected => 100% of the power
Two EV connected => 50% of the power
When one of the EVs disconnect, if the other one
can take more power, the available power goes
back to 100%
0 - 50%
50 - 100%
51 - 99%
50%
31