Siemens SINUMERIK 840D sl Operating Manual page 111

Skip levels, activate
Select the corresponding checkbox to activate the desired skip level.
Note
The "Program Control - Skip Blocks" window is only available when more than one skip level
is set up.
Procedure
Universal
Operating Manual, 03/2013, 6FC5398-6AP40-3BA1
1. Select the "Machine" operating area.
2. Press the <AUTO> or <MDA> key.
3 Press the "Prog. ctrl." and "Skip blocks" softkeys.
The "Program Control" window appears and shows a list of skip levels.
Machining the workpiece
4.8 Controlling the program run
111