Pocket Calculator - Siemens SINUMERIK 840D sl Operating Manual

Introduction
1.4 Operator interface
Accepting parameters
When you have correctly entered all necessary parameters, you can close the window and
save your settings.
You cannot accept the parameters if they are incomplete or obviously erroneous. In this
case, you can see from the dialog line which parameters are missing or were entered
incorrectly.
1.4.8

Pocket calculator

You can use the calculator to quickly calculate parameter values during programming. If, for
example, the diameter of a workpiece is only dimensioned indirectly in the workpiece
drawing, i.e., the diameter must be derived from the sum of several other dimension
specifications, you can calculate the diameter directly in the input field of this parameter.
Calculation methods
The following arithmetic operations are available:
● Addition
● Subtraction
● Multiplication
● Division
● Calculation with parentheses
● Square root of x
● x squared
You can input a maximum of 256 characters in a field.
40
Press the "OK" softkey.
- OR -
Press the "Accept" softkey.
Operating Manual, 03/2013, 6FC5398-6AP40-3BA1
Universal