Set Up Drives; Overview - Siemens SINUMERIK 840D sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Managing programs
9.12 Set up drives
...
9.12
Set up drives
9.12.1
Overview
Up to eight connections to so-called logical drives (data carriers) can be configured. These
drives can be accessed in the "Program manager" and "Startup" operating areas.
The following logical drives can be set up:
● USB interface
● CompactFlash card of the NCU, only for SINUMERIK Operate in the NCU
● Network drives
● Local hard disk of the PCU, only for SINUMERIK Operate on the PCU
Note
The USB interfaces of the NCU are not available for SINUMERIK Operate and therefore
cannot be configured.
250
3.
Press the ">>" and "Properties" softkeys.
The "Properties from ..." window appears.
4.
Enter any necessary changes.
Note: You can save changes via the user interface in the NC memory.
5.
Press the "OK" softkey to save the changes.
Software option
In order to use the CompactFlash card as data carrier, you require the "Additional
HMI user memory on CF card of the NCU" option (not for SINUMERIK Operate on
PCU or PC).
Operating Manual, 03/2013, 6FC5398-6AP40-3BA1
Universal
Advertisement
Table of Contents
