Toshiba VFNC3-2001P Instruction Manual page 135

efesotomasyon.com -Toshiba inverter,drive,servo,plc
[  =  : No voltage compensation/output voltage limited]

Input voltage
0
Output frequency
* The above applies when V/F control mode selection
parameter  is set to "0" or "1".
 
>1 the output voltage can be prevented
Rated voltage
from exceeding the input voltage.
[  =  : No voltage compensation/no output voltage limit]
Input voltage
0
Output
frequency
* The above applies when V/F control mode selection
parameter  is set to "" or "".
 
>1 the output voltage can be prevented
Rated voltage
from exceeding the input voltage.
Note: Rated voltage is fixed at 200 V.
Input voltage
High
Low

Input voltage
High
Low
 
F-31
[  =  : Voltage compensation/output voltage limited]

0
Output frequency
[  =  : Voltage compensation/no output voltage control]

0
Output
frequency
* Note that even if the input voltage is set less than
, for a base frequency of  or higher output
frequency, then an output voltage over 
occurs.
E6581595
Input voltage
High
Low

Input voltage
High
Low
6
 