Section 4
Overview
Commands
Table 4:
Name
Menu
R/L
Clear
Help
Multipage
Function buttons
Table 5:
Name
Function
button
4.1.4
Local HMI functionality
4.1.4.1
Status indication
4.1.4.2
Protection and alarm indication
Protection indicators
The protection Target LEDs are Normal, Pickup and Trip.
26
Command push-buttons
Function buttons
Description
Executing the defined function: OFF, menu short cut or binary control.
The yellow and red status LEDs are configured in the digital fault recorder function,
DRPRDRE, by connecting a pickup or trip signal from the actual function to a BxRBDR binary
input function block using the PCM600 and configure the setting to Disabled,Pickup or Trip for
that particular signal.
© 2017 - 2023 Hitachi Energy. All rights reserved
Description
•
Moving directly to Main menu, if currently in any
other menu or view.
•
Moving to the default view, if currently in Main
menu.
Changing the control position (remote or local) of the
device.
•
When the R LED is lit, remote control is enabled
and local control disabled.
•
When the L LED is lit, local control is enabled
and remote control disabled.
•
When none of the LEDs are lit, both control
positions are disabled.
•
Activating the Clear/Reset view.
Showing the help menu.
Opening alarm panel and selecting alarm page from
the view.
GUID-09CCB9F1-9B27-4C12-B253-FBE95EA537F5 v19
1MRK500127-UUS Rev. M
670 series
Operation manual