Silvercrest 107216 Operating Instructions Manual page 61

Cleaning and care
GB
58
WARNING – RISK OF ELECTRIC SHOCK!
► Always remove the plug from the mains power socket before cleaning the
appliance.
Never immerse the control/heating element 5, the power cord or
►
the housing into water. Do not clean them under running water! This will
irreparably damage the appliance. If required, clean the device with a
damp cloth.
Never open the appliance's operating/heating element 5.
►
WARNING – RISK OF BURNS!
► Allow the appliance to cool down completely before cleaning it.
CAUTION – PROPERTY DAMAGE!
► When cleaning the components, do not use aggressive or abrasive cleaning
agents or materials such as scouring milk or steel wool. These could damage
the upper surface of the appliance!
To simplify cleaning, dismantle the deep fat fryer:
1) Open the appliance lid and pull it upwards and out.
2) Pull the handle upwards until it audibly engages. Remove the frying basket 3.
3) Pull the control/heating element 5 upwards out of the guide rails. Place the
control/heating element 5 in a clean and dry location.
4) Take out the stainless steel container 4 and remove the fat or oil.
NOTE
The frying basket 3 and the stainless steel container 4 can be cleaned
in the dishwasher. They are suitable for dishwashers.
5) Clean the housing and the appliance lid with a damp cloth. If required, use
a mild detergent on the cloth.
6) Clean the control/heating element 5 with a damp cloth. If necessary, add a
little mild detergent to the cloth. Wipe this off afterwards using a damp cloth
so that all detergent residue is removed. Dry the control/heating element 5
thoroughly.
SFK 2800 B2