Replacing the fan in the incoming cubicle (frame R8i)
■
WARNING!
Obey the safety instructions given in
cabinets and modules safety instructions (3AXD50000048633
If you ignore the safety instructions, injury or death, or damage to the
equipment can occur.
If you are not a qualified electrical professional, do not do installation
or maintenance work.
WARNING!
Use the required personal protective equipment. Wear protective gloves and
long sleeves. Some parts have sharp edges.
1.
Stop the drive and do the steps in section
before you start the work.
2.
Remove the shrouding in front of the fan (if any).
3.
Disconnect the fan wiring. Remove the CIO module.
4.
Remove the two screws and slide the fan unit out.
5.
Remove the four screws to detach the fan from the fan unit.
6.
Remove the eight screws surrounding the fan unit.
7.
Install a new fan in reverse order.
ACS880 liquid-cooled multidrive
Electrical safety precautions (page 43)
Maintenance 105
[English]).