Table of Contents
Advertisement
150 Technical data
To aid recycling, most plastic parts are marked with an appropriate identification
code. In addition, components containing substances of very high concern (SVHCs)
are listed in European Chemicals Agency's SCIP database. SCIP is the database for
information on Substances of Concern In articles as such or in complex objects
(Products) established under the Waste Framework Directive (2008/98/EC). For further
information, contact your local ABB distributor or consult European Chemicals Agency's
SCIP database to find out which SVHCs are used in the drive, and to find out where
those components are located.
Contact your local ABB distributor for further information on environmental aspects.
End of life treatment must follow international and national regulations.
For more information on ABB end of life services, see
new.abb.com/service/end-of-lifeservices.
Applicable standards
See
ACS880 liquid-cooled multidrives cabinets and modules electrical planning
(3AXD50000048634
Markings
See
ACS880 liquid-cooled multidrives cabinets and modules electrical planning
(3AXD50000048634
Disclaimers
Generic disclaimer
￭
The manufacturer shall have no obligation with respect to any product which (i) has
been improperly repaired or altered; (ii) has been subjected to misuse, negligence or
accident; (iii) has been used in a manner contrary to the manufacturer's instructions;
or (iv) has failed as a result of ordinary wear and tear.
Cyber security disclaimer
￭
This product can be connected to and communicate information and data via a network
interface. The HTTP protocol, which is used between the commissioning tool (Drive
Composer) and the product, is an unsecured protocol. For independent and continuous
operation of product such connection via network to commissioning tool is not
necessary. However it is Customer's sole responsibility to provide and continuously
ensure a secure connection between the product and Customer network or any other
network (as the case may be). Customer shall establish and maintain any appropriate
measures (such as but not limited to the installation of firewalls, prevention of physical
access, application of authentication measures, encryption of data, installation of
anti-virus programs, etc.) to protect the product, the network, its system and the
interface against any kind of security breaches, unauthorized access, interference,
intrusion, leakage and/or theft of data or information.
Notwithstanding any other provision to the contrary and regardless of whether the
contract is terminated or not, ABB and its affiliates are under no circumstances liable
for damages and/or losses related to such security breaches, any unauthorized access,
interference, intrusion, leakage and/or theft of data or information.
[English]).
[English]).
Advertisement
Table of Contents
