Materials; Applicable Standards - ABB ACS560 Hardware Manual

162 Technical data

Materials

Drive enclosure
Package
Disposal

Applicable standards

The drive complies with the following standards. The compliance with the European
Low Voltage Directive is verified according to standard EN 61800-5-1.
EN 60204-1:2006 +
AC:2010
IEC/EN 60529:1992 + A2:
2013
EN 61000-3-12:2011
IEC/EN 61800-3:2004 +
A1:2012
IEC/EN 61800-5-1:2007
IEC 61800-9-2:2017
IEC 60664-1:2007
• PC/ABS 3 mm, color NCS 1502-Y (RAL 9002 / PMS 1C Cool
Grey), RAL 9002 and PMS 425 C
• ot-dip zinc coated steel sheet 1.5 to 2.5 mm, thickness of
coating 100 micrometers, color NCS 1502-Y
Plywood, cardboard and molded pulp. Foam cushions PE, PP-E,
bands PP.
The main parts of the drive can be recycled to preserve natural
resources and energy. Product parts and materials should be
dismantled and separated.
Generally all metals, such as steel, aluminum, copper and its al-
loys, and precious metals can be recycled as material. Plastics,
rubber, cardboard and other packaging material can be used in
energy recovery. Printed circuit boards and large electrolytic
capacitors need selective treatment according to IEC 62635
guidelines. To aid recycling, plastic parts are marked with an
appropriate identification code.
Contact your local ABB distributor for further information on
environmental aspects and recycling instructions for profession-
al recyclers. End of life treatment must follow international and
local regulations.
Safety of machinery. Electrical equipment of machines. Part 1:
General requirements. Provisions for compliance: The final as-
sembler of the machine is responsible for installing
- emergency-stop device
- supply disconnecting device.
Degrees of protection provided by enclosures (IP code)
Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits
for harmonic currents produced by equipment connected to
public low-voltage systems with input current
Adjustable speed electrical power drive systems. Part 3: EMC
requirements and specific test methods
Adjustable speed electrical power drive systems. Part 5-1: Safety
requirements – electrical, thermal and energy
Adjustable speed electrical power drive systems – Part 9-2:
Ecodesign for power drive systems, motor starters, power
electronics and their driven applications – Energy efficiency in-
dicators for power drive systems and motor starters
Insulation coordination for equipment within low-voltage sys-
tems. Part 1: Principles, requirements and tests.