Installing The Drive Vertically, Frames R3 - ABB ACS560 Hardware Manual

62 Mechanical installation
4. Position the drive onto the screws on the wall. Tighten the screws in the wall
securely.
￭
Installing the drive vertically, frames R3...R4
1. Mark the hole locations with the mounting template included in the package.
Do not leave the mounting template behind the drive. The drive dimensions
and hole locations are also shown in the drawings, see chapter
drawings (page
2. Drill the mounting holes.
3. Start the screws or bolts into the mounting holes.
1
3
Installing the drive vertically, frame size R3...R4
1. Mark the hole locations with the mounting template included in the package.
not leave the mounting template behind the drive. The drive dimensions and
171).
locations are also shown in the drawings, see chapter
page 149.
2. Drill the mounting holes.
3. Start the screws or bolts into the mounting holes.
1
×4
3
2
Mechanical installation
Dimension
Dimension drawings o