Selecting The Speed Setting; Filling While In Use - Silvercrest 296694 Operating Instructions Manual

6) Place the filled and closed blender 3 on the motor block 6 . To do this,
use the recesses on the motor block 6 and ensure that the arrow q on the
blender is pointing to the
clockwise to position
the blender 3 is fitted flush .

Selecting the speed setting

Once the blender 3 is filled and sitting completely closed on the motor block 6,
you can switch on the appliance .
Set the switch 5 to . . .
■ Level 1–3
for liquids or soft foodstuffs, for mixing, blending and stirring
■ Level 3–5
for more solid foods or for chopping
■ Level Ice Crush/Clean
for short, powerful impulse operation, e .g . for crushing ice cubes or when
cleaning . To prevent overloading the motor, the switch 5 does not lock in this
position . Therefore, hold the switch 5 in this position for short periods only .
NOTE
► Fill the blender 3 with a maximum of 180 g of ice cubes .
Otherwise, the ice cubes will not be crushed optimally .

Filling while in use

WARNING!
► If you want to add additional foods during operation, use only the measuring
cap 1 provided for this purpose . Do NOT open the lid 2 .
► Do not insert cutlery items or mixing tools into the blender 3 while the
appliance is in use . There is a considerable risk of injury if these come into
contact with the swiftly rotating cutting blades 4!
To add more food while the appliance is in use, . . .
1) Remove the measuring cap 1 from the lid 2 .
2) Add the ingredients .
3) Press the measuring cap 1 back into the lid .
■ 62 │ GB │ MT
symbol while doing so . Turn the blender 3
until it audibly engages . The motor cannot start until
SSM 600 B2