Table of Contents
Advertisement
Operation
Before Operation
Before Operation Safety
General Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Engage the parking brake, shut off the machine,
remove the key, and wait for all movement to stop
before you leave the operator's position. Allow
the machine to cool before adjusting, servicing,
cleaning, or storing it.
•
Know how to stop the machine and shut off the
machine quickly.
•
Check that operator-presence controls, safety
switches, and safety protective devices are
attached and functioning properly. Do not operate
the machine unless they are functioning properly.
•
Before mowing, always inspect the machine to
ensure that the cutting units are in good working
condition.
•
Inspect the area where you will use the machine
and remove all objects that the machine could
throw.
Identifying the Cutting
Units
The InfoCenter uses the numbers 1, 2, and 3 to
identify each cutting unit (e.g., CU1, CU2, and CU3
in the A
menu).
BOUT
•
1 refers to the center cutting unit
•
2 refers to the front left cutting unit
•
3 refers to the front right cutting unit
Using the InfoCenter
to Adjust the Machine
Settings
You can use the InfoCenter to adjust the following
machine settings:
•
•
•
•
•
•
(Figure
25)
•
(Figure
25)
•
(Figure
25)
•
•
•
25
Figure 25
1. Center cutting unit
2. Front left cutting unit
Tap-off delay; refer to
(page
26).
Reel speed while mowing; refer to
Mowing Reel Speed (page
Cutting-unit lower speed; refer to
Cutting-Unit Lower Speed (page
Reel speed while backlapping the cutting units;
refer to
Adjusting the Backlap Reel Speed (page
26).
Clip control; refer to
Feature (page
27).
Height of cut (HOC); refer to
of Cut (HOC) (page
Number of cutting-unit blades; refer to
the Number of Cutting-Unit Blades (page
Maximum mowing speed; refer to
Maximum Mowing Speed (page
Maximum transport speed; refer to
Maximum Transport Speed (page
Maximum reverse speed; refer to
Maximum Reverse Speed (page
Slow and turn; refer to
Function (page
27).
3. Front right cutting unit
Adjusting the Tap-Off Delay
Adjusting the
26).
Setting the
26).
Setting the Clip-Control
Adjusting the Height
27).
Adjusting
27).
Adjusting the
27).
Adjusting the
27).
Adjusting the
27).
Setting the Slow and Turn
g289940
Advertisement
Table of Contents
