Table of Contents
Advertisement
Maintenance
WARNING
Modifying the original machine, parts,
and/or accessories may alter the warranty,
controllability, and safety of the machine.
Making unauthorized modifications to the
original machine and/or not using genuine
Toro parts could lead to serious injury or
death.
• Do not make unauthorized modifications to
the machine, parts, and/or accessories.
• Use only genuine Toro parts.
Maintenance Safety
•
Before you leave the operator's position, do the
following:
– Park the machine on a level surface.
– Move the function-control switch to the
N
position.
EUTRAL
– Ensure that the cutting units are disengaged
and lower them to the ground.
– Engage the parking brake.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After the first 8 hours
Before each use or daily
Every 50 hours
Every 200 hours
Every 800 hours
Maintenance Procedure
• Torque the wheel nuts.
• Change the traction-motor-gearbox fluid.
• Inspect the seat belt(s) for wear, cuts, and other damage. Replace the seat belt(s) if
any component does not operate properly.
• Check the safety-interlock system.
• Inspect and cleanup after mowing.
• Check the tire pressure.
• Check the reel-to-bedknife contact.
• Wash the machine (do not use high-pressure water).
• Check the battery cable connections.
• Torque the wheel nuts.
• Change the traction-motor-gearbox fluid.
– Shut off the machine and remove the key.
– Wait for all movement to stop.
•
Allow machine components to cool before
performing maintenance.
•
Only allow a qualified repair person to service the
machine.
•
Disconnect the main-power connectors before
performing maintenance.
•
If possible, do not perform maintenance while the
machine is running. Keep away from moving parts.
•
Support the machine with jack stands whenever
you work under the machine.
•
Carefully release pressure from components with
stored energy.
•
Keep all parts of the machine in good working
condition and all hardware tightened.
•
Replace all worn or damaged decals.
•
To ensure safe, optimal performance of the
machine, use only genuine Toro replacement
parts. Replacement parts made by other
manufacturers could be dangerous, and such use
could void the product warranty.
40
Advertisement
Table of Contents
