Capacity Control Details Setting - Hitachi CIS02-H Operation Manual

5. Detailed Menu Operation

5.2 Capacity Control Details Setting

This function is used to set "Capacity Control Level".
NOTES:
•
This function cannot be set when the indoor unit and outdoor unit do not support this function.
•
For how to set "Capacity Control" mode ON/OFF, please refer to "4. Menu Operation".
1. Capacity Control Details Setting (Capacity Control Level Setting)
Step1. Enter "Capacity Control Details Setting" by selecting
"0 2" as the item number, refer to "5. Detailed Menu
Operation".
Step2. Press " " or " " to switch the set value （ "0 0" ↔ "0 1"
↔ "0 2" ） to set the "Capacity Control Level".
Details of set value are shown in the below table:
Set Value
Step3. Press "
starts to flash.
Step4. Press "
return to the home screen.
Step5. When "Capacity Control" mode is ON, "
on the home screen. The "
Control Level" changes.
27
Description
0 0 Capacity Control Level is Low.
0 1 Capacity Control Level is Med.
0 2 Capacity Control Level is High.
" to save the setting and the item number "0 2"
" (On/Off) once, or press "
" icon switches as "Capacity
" for 3 seconds to
Capacity Control Level
" is displayed
Icon
Low
Med
High
Set Value
Item No.
Icon