Table of Contents
Advertisement
4. Menu Operation
4.5 AutoBoost Setting
This function is used to increase the cooling and heating capacity in 30 minutes once the operation starts.
This function is only available when the operation mode is Cool or Heat.
The unit starts each time in quick mode until the setting is canceled.
NOTES:
•
AutoBoost cannot be set when the outdoor unit does not support this function.
•
AutoBoost cannot be used if Capacity Control is not supported.
•
When this function is activated under cool or heat mode for at most 30 minutes, fan speed level may change
to "Auto" and even decrease to "Low" regardless of the previous setting. Please be noted when the indoor
unit requires a certain level of fan speed.
•
The wired remote controller only supports the function of "Quick + Heat" in the AutoBoost mode.
1. Set AutoBoost mode ON/OFF.
Step1. Select "AutoBoost Setting", refer to "4. Menu
Operation".
Step2. Press " " or " " to switch AutoBoost mode between ON
and OFF.
Step3. Press "
screen.
Step4. When the AutoBoost mode is ON, "
the home screen.
23
" to save the setting and return to the home
" is displayed on
Set Value (ON:
, OFF:
Icon
)
Advertisement
Table of Contents
