Individual Louver Setting - Hitachi CIS02-H Operation Manual

Eco compact wired remote controller

Hide thumbs Also See for CIS02-H:

Table of Contents

8. Individual Louver Setting

This function is to individually set the air direction of multiple air outlets.

NOTES:

•

This function is available when the indoor unit supports individual louvers.

•

It cannot be set while the air conditioner is stopped.

•

The fan speed changes to "Low" while this function is being set. (After the setting is completed, the unit

operation is back to normal.)

•

As for "Start-up of Heating Operation", "During Defrost Operation" and "Activation of Thermo-Controller", all

the louver angles are automatically secured horizontally when this function is activated.

•

This function is not available if two remote controllers (including a combination of wired controller + wireless

controller) are used.

8.1 Individual Louver Setting

1. Individual Louver Setting

Step1. Press " " for 3 seconds to start the setting.

•

If there is one indoor unit connected with the wired

remote controller, Step3 is displayed.

Step2. Indoor unit selecting screen is displayed.

Each indoor unit has its own index number. And the

corresponding refrigerant system number and address

number are displayed on the upper right corner of the

screen.

Refrigerant System No.

of the selected unit

Address No.

of the

selected unit

Index No.

Table of Contents