Autoboost (Quick Mode) Setting - Hitachi PC-ARFG-E Installation & Operation Manual

FUNCTION MENU

5.7 AUTOBOOST (QUICK MODE) SETTING

AUTOBOOST is the commercial name of the "Quick mode"
function.
This function increases the cooling or the heating capacity for
30 minutes since the beginning of operation, in order to reach
the setting temperature in the room as quickly as possible. It is
only available when the operation mode is cooling or heating.
This function makes operation begin with "Autoboost" option
every time ON operation is set, until this function is deactivated
(Autoboost setting = "Not Set").
?
N O T E
• Autoboost cannot be set when the outdoor unit does not support this
function.
• Autoboost cannot be used if Power Savings is not supported.
• When quick function is activated while mode is "Cool", fan speed
changes and is locked as "Auto" for 30 minutes at the longest
regardless of the current setting. While in this operation (fan
speed "Auto"), fan level may drop as low as "Low" when the room
temperature gets close to the setting temperature. The operation
starts regardless of the fan speed.
Set the autoboost
1 Select "Autoboost" on the "Function Menu" screen and press
"OK".
20 PMML0565 rev.1 - 04/2022
2 Press " " or " " the selected items changes as follows:
"Not Set" ↔ "COOL" ↔ "HEAT" ↔ "Cool + Heat".
Select the Autoboost mode and press "OK" to confirm the
settings.
Press " " to return to the "Function Menu" screen.