SERVICE & INSTALLATION MENU
6.1.4 Input / Output Setting
1 Select "Installation Menu" on the Service & Installation
screen and press "OK".
2 Select "Input/Output" setting and press "OK".
3 Select the indoor unit by pressing " ", " ", " ", or " " and
press "OK".
This screen is NOT displayed when only one indoor unit
is connected with the controller. In this case, "Step4" is
displayed.
Indoor unit number
(Refrigerant system number - Indoor unit Address
59
PMML0565 rev.1 - 04/2022
4 Press " " or " " to select the item.
5 Press " " or " " to change the setting.
6 Press "OK" and the confirmation screen is displayed.
7 Select "Yes" and press "OK" to confirm the setting and the
screen returns to Step2.
If "Cancel" is selected, the setting is cancelled and the
screen returns to Step2.
If there is more than one indoor units connected to the
remote controller, the screen returns to Step3.
Press " " to return to Step4.