Power Consumption Display - Hitachi PC-ARFG-E Installation & Operation Manual

FUNCTION MENU

5.6 POWER CONSUMPTION DISPLAY

This function displays the power consumption of the outdoor unit
compressor.
The value of each displayed in Graph/List format is 1 day
(24h (- every 2 hrs.)), 1 week (7 days), and 1 year (12 months).
?
N O T E
• The numerical value is a reference. Do not use this unit for the following:
calculation of power rates, examination of the power contract, or
calculation of greenhouse gas emissions.
• This cannot be set if the power savings function is not supported.
• In following instances, the calculated value may be a deficit or may
be changed.
- Power Failure (outdoor unit, indoor unit, wired controller)
- Communication Failure (outdoor unit ↔ indoor unit ↔ wired
controller)
- Modification of time
• indicates that schedule control is not possible. Refer to
"7.1 Adjusting date / time" to set the date and time.
Set power consumption display
1 Select "Power Consumption Display" on the "Function Menu"
screen and press "OK".
• If the current time is not set, the "Adjusting Date/Time"
setting screen is displayed.
2 Press "OK".
19 PMML0565 rev.1 - 04/2022
3 Press " " or " " to select the display period, and then press
"OK".
It switches in the order of 1 day (24 hours) ↔ 1 week
(7 days) ↔ 1 year (12 months).
• Comparison
Press " " or " " to switch the comparison target for the display
period.
2 days before / 1 day before ↔ 1 day before / Today
2 week ago / 1 week ago↔ 1 week ago / This week
2 years ago / 1 year ago ↔ 1 year ago / This year
• Display scale
Press " " or " " to switch the display scale.
• Graph ↔ List display
Press "OK" to switch between the graph and list display of
the power consumption display.
• Press " " to return to the display period selection screen.