Hitachi PC-ARFG-E Installation & Operation Manual page 63

SERVICE & INSTALLATION MENU
Element Optional function
Lower limit of setting
temperature for cooling
FC
(Minimum value of setting
temperature allowed in
cooling)
Upper limit of setting
temperature for heating
Fd
(Maximum value of setting
temperature allowed in
heating)
FE Not used
FF Not Used
H1 Not used
Indication of hot start
H2 (No Indication of operation
limitation)
H3 Not used
H4 Not Used
J1 Not used
J2 Not used
J3 Colour of the run indicator
49 PMML0565 rev.1 - 04/2022
Individual
Settings
setting
Function disabled
00 19°C is the standard minimum set point
(factory setting)
01 +1°C (Lower limit 20°C)
02 +2°C (Lower limit 21°C)
03 +3°C (Lower limit 22°C)
X
· ·
· ·
· ·
08 +8°C (Lower limit 27°C)
09 +9°C (Lower limit 28°C)
10 +10°C (Lower limit 29°C)
Function disabled
00 30°C is the standard maximum set point.
(factory setting)
01 -1°C (Upper limit 29°C)
02 -2°C (Upper limit 28°C)
03 -3°C (Upper limit 27°C)
X
· ·
· ·
· ·
10 -10°C (Upper limit 20°C)
11 -11°C (Upper limit 19°C)
12 -12°C (Upper limit 18°C)
00
- 01 -
02
00
O -
01
00
– -
01
00 Displayed
X
01 Hidden
00
– -
01 / 02
00 -
–
01 -
00
- -
01
00
- -
01
00 Green (factory setting)
X
01 Red
Setting conditions Description
This function defines the lowest
temperature setting value for
FAN/COOL/DRY modes.
This function defines the highest
temperature setting value for
HEATING mode.
Models:
RPF(I)-FSN2E
up to 20°C (FC=10)
Use at 00 conditions
Use as 00 conditions
Use at 00 conditions
This function is used to display
or hide the automatic control
indication.
Models:
RPF(I)-FSN2E
Not available, use at 00
conditions
Use at 00 conditions
Use at 00 conditions
Use at 00 conditions
Use at 00 conditions
–